- Additional information
- Reviews (0)
For use with CARDLOCK compact and Switch2 systems. The function card pack unlocks the more advanced features of these systems.
Requires order card from starter pack if purchasing separately.
Installation – The CARDLOCK Function card pack must be ordered with the Starter pack or by using the order card from your Starter pack. It is supplied ready to use with your system.
Operation – The various cards in the pack are to configure the different functions.
Zone cards: There are three zone cards; green, amber and red. The point of zoning is to restrict the access privileges of groups of users dependant on the colour of their card. Swiping any of the three Zone cards through a reader will turn off the LED of that colour. Users with that colour user card will not be granted access. If the same Zone card is swiped again the LED will turn back on. This means that users with that colour card will be granted access.
Time zones: This function allows a coloured zone to be activated/deactivated by a time clock.
Remote release: This card returns a system from the time zones mode back to its default state, where the exit button contacts may be used for a press to exit button (Compact systems only).
Bar all users: A freshly installed CARDLOCK system will recognise and admit all users cards that have been ordered for it. In some cases it may be more appropriate to start with all cards invalid so they may be validated individually.
Card plus PIN: This allows CARDLOCK and TOUCHLOCK systems to be connected to give card plus code access control (Compact systems only).
Relay toggle card: This changes the operation of the relay from momentary to toggling (or latching). If a valid card is swiped the relay will switch. The relay will remain switched until either the same or any other valid card is swiped.
Accessories, Paxton, Prox Card, RFID Card